380G Henry Angle Handwheel Shut-Off Valve, 3/4" FPT

Henry 380G 3/4" FPT Angle Handhweel Shut-Off Valve

Applications
The threaded end series are a lower-cost option to manually control flow in a pipe. Henry Technologies’ Shut-Off Valves are suitable for use with ammonia, HCFC and HFC refrigerants and their associated oils, as well as other industrial fluids non-corrosive to ductile iron, steel, Teflon and synthetic rubber.

The Henry Technologies’ range of Globe and Angle Shut-Off Valves is used for isolation purposes, primarily within ammonia refrigeration systems.

Main Features

• Non-rotating self-aligning swivel seat disc with fully retained Teflon seat ring
• Lower cost than flanged designs
• Backseating stem to allow for replacing stem packing while under pressure
• Protective painted finish
• Valve bonnets threaded to accept Henry Seal Cap

Technical Specifications

• Maximum cold working pressure = 400 PSI (27.6 Bar)
• Allowable operating temperature = -20°F to +275°F (-29°C to +135°C)

Materials of Construction

The valve body is made from ductile iron. The valve bonnet is made from ductile iron. The seal caps are molded plastic. The stem is made from stainless steel and is adaptive for hand-wheel mounting.