023Z5043 Danfoss DML 163 - 3/8" Hermetic Filter Drier, FLARE Outlet Connection

Eliminator driers have a solid core with binding material held to an absolute minimum. There are two types of Eliminator cores. Type DML driers have a core composition of 100% Molecular Sieve, while type DCL contain 80% Molecular Sieve with 20% activated alumina. Eliminator type DML driers are designed for applications requiring the highest moisture capacity. Eliminator type DCL driers are designed for applications requiring high moisture capacity and acid adsorption capacity. Available with solder (cu-plated steel connectors) and flare connections. For other connections please contact your Danfoss Sales Representative.

• 100% Molecular Sieve core\
• High drying capacity minimizing the risk of acid formation (hydrolysis)
• Recommended for use with R134a, R404A, R32,R410A, R407C, R23, R600, R600a,R1234yf, R1234ze, R407f, R290, R452A,R444B, R449A, R448A and R450A refrigerants
• Will not deplete oil additives

• 80% Molecular Sieve with 20% activated alumina
• Perfect core blend for systems that operate at high condensing temperatures and require
   high drying capacity
• Recommended for use with Applicable to R22, R134a, R404A, R32,R410A, R407C, R23, R600, R600a,R1234yf, R1234ze, R407f, R290, R452A,R444B, R449A, R448A and R450A refrigerants

• PED approved for PS 46 bar
• Available with solder (Cu-plated steel connectors) and flare connections
• Corrosion resistant powder-painted finish. Special coating for marine applications available upon request.
• Allows installation with any orientation provided the arrow is in the flow direction
• Available in sizes 3 – 75 cubic inches

• 25 μm (0.001 in.) filter provides high retention with minimal pressure drop
• Thermally stable up to 120 °C