027B0921 Danfoss CVP Pilot valve 4 to 28 bar

Pilot valves are intended for mechanical control of a main valve and are ready for direct installation in the top cover of the main valve. Small capacities can be controlled by the pilot valve directly without a main valve when installed in the matching CVH housing.

The extensive range of Danfoss pilot valves include:

• Constant-pressure pilot valve, type CVP
• Diffeential-pressure pilot valve, type CVPP
• Pressure-operated pilot valve with reference pressure connection, type CVC
• Electronically operated constant-pressure pilot valve, type CVE
• Solenoid pilot valve, type EVM (NC)
• Solenoid pilot valve, type EVM (NO)
• Housing, type CVH for pilot valves, for mounting in external pilot lines

Features:

• Applicable to HCFC, non falmmable HFC, R717 (Ammonia) and R744 (CO2). The use of Pilots with flammable hydrocarbons is not recommended
• Extremely accurate pressure and temperature control
• The pilot valves can be screwed directly into the main valve, thus avoiding the necessity of welding, soldering and seperate pilot lines.
• The pilot valves can be mounted directly in the ICS, PM or ICF or it can be connected via an external pilot line and a CVH housing.
• All pilot valves can be used on all sizes of main valves.
• Several pilot calves be connected in series or in paralledl to provide many functions in the same ICS or ICF valves.
• All pilot valves are delivered with gaskets.