AKS 3000 is a series of absolute transmitters with high-level signal conditioned current output, developed to meet demands in A/C and refrigeration. AKS 3000 utilizes the proved piezoresistive measuring principle, which has been used for decades in Danfoss pressure transmitters.The pressure reference is a sealed gauge. This means that atmospheric pressure variations have no influence on regulating accuracy. A must in accurate low pressure regulation. All materials in contact with the refrigerant and materials for the housing are AISI 316L stainless steel. No soft gaskets, all environmental sealings are made through laser weldings only. AKS 3000 has a 4 – 20 mA output, and is available with spade terminals for EN 175301-803 plug.
Features:
Designed to meet A/C and refrigeration demands without compromising control accuracy concerning:
Tough environment
Vibration
Shock during operation and transport
Humidity and ice formation
Temperature variations
Corrosive media like ammonia gases and salt mist
Convenient performance
4 – 20 mA signal
1% typical accuracy
0.5% typical linearity
Prepared for high pressure refrigerants Bar code for tracing of calibration data
Convenient performance
Compact design
Max. working pressure ≥33 bar
Temperature compensation for suction line
Optimized accuracy at -10 °C and 20 °C for suction line installations, see page 4
¼ -18 NPT, G 3⁄8 A, G ½ A or ¼ flare ensures tight pressure connection
All laser welded AISI 316L stainless steel enclosure