Danfoss 084B8522 Refrigeration Appliance Control (TXV), Type EKC 202B
Application
The controller is used for temperature control refrigeration appliances and cold rooms in supermarkets
Control of defrosting, fans, alarm and light
Principle The controller contains a temperature control where the signal can be received from one temperature sensor. The sensor is placed in the cold air flow after the evaporator or in the warm air flow just before the evaporator. The controller controls the defrost with either natural defrost or electric defrost. Renewed cutin after defrost can be accomplished based on time or temperature. A measurement of the defrost temperature can be obtained directly through the use of a defrost sensor. Two to four relays will cut the required functions in and out – the application determines which:
Refrigeration (compressor or solenoid valve)
Defrost
Fan
Alarm
Light
Advantages
Integrated refrigeration-technical functions
Defrost on-demand in 1:1 systems
Buttons and seal imbedded in the front
IP65 enclosure from the front panel
Digital input for either:
Door contact function with alarm
Defrost start
Start/stop of regulation
Night operation
Change-over between two temperature reference
Case cleaning function
Instant programming via programming key
HACCP
Factory calibration that will guarantee a better measuring accuracy than stated in the standard EN ISO 23953-2 without subsequent calibration (Pt 1000 ohm sensor)