62022133 Temprite 133A Clean-Up Filter Kit

The Temprite High Efficiency Filter employs a matrix-type borosilicate coalescent filter. These fine glass fibers cause the oil molecules to collide and create bigger droplets, until each is large enough to be forced to the outer drain layer of the filter. The droplets fall to the bottom of the separator and the oil is returned to the compressor. Because the Temprite Standard Filter is finer than any other filter, it picks up all effluent and dirt in the system down to 0.3 microns in size, increasing system efficiency and lowering energy costs.

The biggest energy drains on any refrigeration system are dirt, contaminants and excess refrigerant oil. New refrigerants coming onto the market have a solvent effect, meaning more contaminants than ever can clog your system. Solid contaminants in the system are harmful to sensors and other delicate components. Eliminating solid contaminants and excess oil from the system enhances the entire system’s performance:

• Thermostatic Expansion Valves (TXV) work more efficiently.
• Desiccant in filter driers is more effective when not logged with oil, preventing moisture from being absorbed.

Specifications:

• High Efficiency Filtration: Laboratory determined nominal 99.995%+ separation efficiency rating for particles in the .3 to .6 micron size range.
• Filter Media: Borosilicate fiber matrix.
• Filter Hardware: Carbon steel end caps and sheet metal retainer.
• Standard O-ring Material: Neoprene (others are available).
• Dual Function Application Range: Filters dirt out of the refrigerant and oil and separates the oil from the refrigerant gas.
• Oil Carryover: Laboratory determined nominal .003 ppm oil carryover based on 40 ppm oil injection rate.
• Filter Temperature Limits: Tmin = -90°F, Tmax = 375°F.
• Filter Pressure Limits: N/A.