8-HD Miro Heavy Duty Mechanical Support with Decking

MIRO HD-Mechanical Supports are designed to elevate rooftop mechanical units, cabinets and other devices. The HD-Mechanical Support deck is 12" x 2-1/2" x 18 ga. planking. The supports are adjustable in height per the project requirements. All metal parts are hot-dip galvanized for outdoor weathering protection. The support bases are injection molded Polycarbonate.

Accessories:

• 9 x 15.25 Support pad
• Eternabond® 2-sided tape

Key Information:

• Designed to support mechanical units, cabinets and other devices.
• Designed to meet project specific dimensions with adjustability as specified.
• Support Deck is constructed of 12" x 2-1/2" x 18 ga. metal planking. (Bar Grating may be specified or required depending on loading and dimensional requirements)
• Support is designed to not exceed 3.0 psi to the finished roof surface under each base.
• Base Material: Polycarbonate
• All metal parts are either stainless steel, hot-dip galvanized or pre-galvanized.
• Non-Anchored supports do not provide significant resistance to wind or seismic loading. Contact MIRO Industries for wind and seismic solutions.
• Manufacturer suggested loading is not to exceed 550 lbs to each base. Contractor to ensure load distribution to each base does not exceed suggested loading to each base.

To obtain pricing for the 8HD model, call us at 833-900-1499 and have the following information available:

1. Width and Length desired
2. Height off roof (HOR)
3. Weight of unit being supported