A pipestand with a strut and clamp pipe support system used for supporting roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping.
Pipes rest on a 24" length of channel which is mounted on the bases. The pipes can then be fastened by using typical clamps locked to the strut. The pipe support base is made of polycarbonate resin and the strut is made of hot-dip galvanized steel.
Features
Designed to support conduit (ganged) cable trays or other mechanical piping.
Adjustable from the factory set maximum height of 6-1/8" down to a minimum height of 4-1/8"
Maximum load is 172.5 lbs/ft. (3.0 psi) Make certain each support is properly elevated to evenly distribute weight at all support locations.
Recommended spacing is not to exceed 10' centers depending upon the load.
Base Material: Polycarbonate
All metal parts are either stainless steel or hot-dip galvanized.
Unit Weight: 6.11 lbs.
More Information
More Information
Weight
6.110000
Condition
New
Manufacturer
MIRO Industries
Base Material
Polycarbonate
Size
The support consists of (2) 7" by 10" bases with a 24" length of channel.
Maximum Pipe Clearance
Adjustable support height from 4.125" to 5.5"
Maximum Load Weight
Maximum load weight may not exceed 115 lbs/ft
Spacing
Manufacturer's recommended spacing is not to exceed 10 foot centers depending upon the load.