A-8-BS-8 Miro 8-Base Strut-8 Rooftop Pipe Support - 2.5" ID/3" OD

Miro 8-Base Strut-8 Rooftop Pipe Support

A pipe support with "strut" used to support roof-mounted electrical conduit, solar piping, gas pipes, and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane.

Pipes rest on a strut system which is made of hot-dip galvanized steel. The pipe support base is made of polycarbonate resin, and all other metal parts are made of hot-dip galvanized or stainless steel.

Pipestand will accommodate up to 2.5" pipe (inside diameter) or up to 3" (outside diameter) pipes.

Features

• Designed to support conduit (ganged) cable trays or other mechanical piping.
• Adjustable from the factory set maximum height of 8-7/8" down to a minimum height of 3-1/2"
• Maximum load is 172 lbs. (3.0 psi) Make certain each support is properly elevated to evenly distribute weight at all support locations.
• Recommended spacing is not to exceed 10' centers depending upon the load.
• Base Material: Polycarbonate
• All metal parts are either stainless steel or hot-dip galvanized.
• Unit Weight: 2.33 lbs.