C380G Henry Shut-Off Valve, Stainless Steel Globe Seal Cap 3/4" nominal size 3/4" FPT connection size

The main functions of the Shut-Off Valve are to start or stop fluid within the particular circuit it is installed.

Applications

The threaded end series are a lower cost option to manually control flow in a pipe. Henry Technologies’ Shut-Off Valves are suitable for use with ammonia, HCFC and HFC refrigerants and their associated oils, as well as other industrial fluids non-corrosive to ductile iron, steel, Teflon and synthetic rubber.

The Henry Technologies’ range of Globe and Angle Shut-Off Valves is used for isolation purposes, primarily within ammonia refrigeration systems.

Main Features

• Non-rotating self aligning swivel seat disc with fully retained Teflon seat ring
• Lower cost than flanged design
• Backseating stem to allow for replacing stem packing while under pressure
• Protective painted finish
• Valve bonnets threaded to accept Henry Seal Cap

Technical Specifications

• Maximum cold working pressure = 400 PSI (27.6 Bar)
• Allowable operating temperature = -20°F to +275°F (-29°C to +135°C)

Materials of Construction

The valve body is made from ductile iron. The valve bonnet is made from ductile iron. The seal caps are moulded plastic. The stem is made from stainless steel and is adaptive for hand-wheel mounting.