Ammonia detection tape allows for the visual detection of ammonia gas leaks by changing color from white to blue/green when in contact with ammonia gas.
Features:
Tape visually changes color, from white to dark blue/green, in as little as 10 seconds when exposed to NH3 (depending on the flow rate, temperature, time and percentage of ammonia).
Provides an additional safety net for detecting gas leaks and improves detection time by making it easier to find intermittent leaks.
Is highly sensitive and can detect ammonia leaks that contain as little as220ppm NH3 concentration.
DX-8208A will provide a long-lasting color change once exposed to ammonia gas.
Easy to use; applies the same as a typical silicone / polyesterPSA.
Can be used in most indoor or outdoor environments.
Color change retention time is over 24hrs, typically over 3 days, depending on exposure condition.
Superior capability in detecting the location of the NH3 leak.
Less influenced by wind, position, duration, skills, etc. compared to conventional ammonia detection products.
Easy to check vertical and bottom faces of the adherend.
Application:
Ammonia detection tape can be easily applied to or wrapped around pipes, flanges, fittings, valves, access panels, etc. to immediately identify an ammonia leak location.
The long-lasting color change identifies the leak location even if the NH3 line is shut off.
Applications include and are not limited to ammonia refrigerators, ice rinks, fertilizer plants, power and chemical plants, transportation markets, ammonia producers, storage tanks, compressors, new energy markets and more.