HOURS
Monday-Friday: 7AM-5PM (CST)
HBEJ-MK2 is an oil ejector for automatic oil drainage for industrial ammonia refrigeration systems. The ejector is used together with an HBOR oil pot controller and 2 solenoid valves.
The ejector uses hot gas as propellant and is designed for a hot gas pressure until 120 bar.
The ejector is made in stainless steel and has compression fitings as well as a thread connection. The ejector is a simple economical solution for transporting oil from point A to point B without worn parts and with a low energy consumption.
HBEJ oil return ejector can be used on CO2 system to return the collected oil / refrigerant mixture from the evaporator to the suction line on floded systems.
The ejector will empty 0,05 l/minute minimum.
Weight | 2.000000 |
---|---|
Condition | New |
Manufacturer | HB Products |
Ambient Temperature | -22°/122°F (-30°/50° C) |
Material | AISI 304 |
Liquid High Temperature | -76°/302°F (-60°/150°C) |
Maximum Pressure | 120 bar |
Length | 6" |
Width | 6.3" |
Height | 7.1" |