HOURS
Monday-Friday: 7AM-5PM (CST)
HBSO1 (PAO & mineral oil) and HBSO2 (POE & PAG oil) is a level switch for detecting common lubricating oils in refrigeration systems. Typically it is installed in/on the compressor and the oil separator, but it is also suited for installation in other locations in the oil system. The sensor's measurement principle makes it unique for these purposes, since the properties of the measurement principle allows it, among other things, to detect oil without detecting refrigerant. It is calibrated so that it is unaffected by oil spray and only allows a small amount of foam. The sensor is also constructed so as to resist high pressure and temperatures.
The sensor is suited for use on transcritical CO2 refrigeration systems.
Product Features:
Proven and reliable sensor with solid stae relay output and NO/NC contact function.
The NO/NC term refers to the state of the contact in "dry" condition, when not influenced by the oil.
Weight | 2.600000 |
---|---|
Condition | New |
Manufacturer | HB Products |
Thread Type | 1-1/8" UNEF |
Contacts | NC |
Transistor Type | Solid State |
Mechanical Connection | with Set Screw Connection |
Ambient Temperature | -22°/122°F (-30°/50° C) |
Oil Type | for PAO & Mineral Oil |
Current Consumption | 40 W |
VAC | 90 to 240 V AC |
Plug Connection | M12 - DIN 0627 |
Oil Temperature | 32°/140°F (0°/60°C) |
Maximum Pressure | 150 bar |
Protection Degree | IP54 |
Vibrations | IEC 68-2-6 (4g) |
Material - Liquid Parts | AISI 304 / PTFE |
Material - Electrical Parts | Nylon 6 (PA) |
EMC Test | EN 61000-2 |
LED Indication | 4 x red |
Length | 4" |
Width | 9.4" |
Height | 11.8 |