TB-1000 Cool Air Inc. Ammonia Solution Calibration Bottle, 1000 ppm

Anhydrous ammonia should be used to calibrate ammonia gas detectors that utilize solid state sensor technology as the detection method. It is recommended to calibrate at the same concentration that the main 'high' alarm set point is set to. For example, if the high alarm is set to 100 ppm, it is recommended to calibrate using a 100 ppm calibration bottle.

• Calibration bottle should be at room temperature prior to performing calibration procedure
• Estimate roughly 3-5 calibrations per bottle, assuming cap is not left off of the bottle for any period long then required to complete the calibration process
• Expiration 1 year after date of shipment