Temprite 920-920R Series Filter Replacement Kits

The Temprite Standard Filter employs a matrix-type borosilicate coalescent filter. These fine glass fibers cause the oil molecules to collide and create bigger droplets until each is large enough to be forced to the outer drain layer of the filter. The droplets fall to the bottom of the separator and the oil is returned to the compressor. Because the Temprite Standard Filter is finer than any other filter, it picks up all effluent and dirt in the system down to 0.3 microns in size, increasing system efficiency and lowering energy costs.

Temprite's Clean-Up® Filters are made of pleated fiber paper best suited for cleaning up a very dirty system. After a burnout in an accessible coalescent oil separator, install a Temprite Clean-Up® Filter to purge the system of contaminants. Using a Clean-Up® Filter in a coalescent oil separator can return the oil to near-virgin state.