HOURS
Monday-Friday: 7AM-5PM (CST)
QwikConnect™ ECM Adapter for replacing ECM 2.3 or Eon Motors in fan coil units to Evergreen® CM or ECM motors.
This adapter has two plugs on the one end to receive the plugs that were intended for an ECM 2.3 / Eon motor (J1 for Power, J2 for Communications). The signals from J1 and J2 are wired to the appropriate plugs for the Evergreen® Motor (P1 for Power, P2 for Communications).
To utilize all speeds on the Evergreen, connect the QwikConnect to the PWM input only (speed tap 1) on the Evergreen. This will allow the Evergreen to change speeds automatically. If running the motor on only one speed is desired connect the QwikConnect to speed tap 3 or 5.
Weight | 2.000000 |
---|---|
Condition | New |
Manufacturer | QwikProducts |